SPEEDRAM 1000 - Floor Type Boring and Milling Machine with spindle diameter from 130 to 160 mm
SPEEDRAM 1000 is available with spindle diameter from 130 to 160 mm and power of 37 kW (S1) and 46 kW (S1).
Highlights
- Integral hydrostatic guideways with hydrostatic bearings for high speed traverse
- High spindle speeds (up to 4000 rpm for Ø 130 mm spindle)
- Completely enclosed ram with hydrostatic guideways on 4 sides, giving mechanical and thermal symmetry
- No 3 automatic mechanic compensation system in-process: ram deflection - headstock tilting - column tilting and deflection
- Automatic in-process compensation system of ram
- Spindle bearings lubricated by air-oil system and thermostabilized by cooled oil circulation
- Cast iron structures for bed, saddle, column, headstock and ram
- Vertical headstock travel controlled by dual precision ballscrews with two measurement systems. This allows keeping the headstock position independent to the ram extension and attachment weight.
Technical specification
| WORKING AREA | ||
|---|---|---|
| X Axis Column | mm | 4000 + n° x 1000 |
| Y-Axis Headstock | mm | 2000-4000 |
| Z-Axis Ram | mm | 1000 |
| W-Axis Spindle | mm | 700 |
| Z + W Axes | mm | 1700 |
| SPINDLE HEADSTOCK | ||
| Boring Spindle Diameter | mm | 130-160 |
| Tool Taper | mm | ISO 50 |
| Ram Section | mm | 360 x 400 |
| Max. Rotation Speed | rpm | 4000-3500 |
| Spindle Gear Ranges | mm | 2 |
| Spindle Power (S1/S2) | kW | 37 / 51 - 46 / 60 |
| Spindle Torque (S1/S2) | Nm | 1500-2100 / 2100-2700 |
| MAX. AXIS FEED RATES | ||
| X-Y-Z-W Axes | mm/min | 30000 |