SPEEDRAM 5000 - Floor Type Boring and Milling Machine with spindle diameter from 225 to 260 mm
SPEEDRAM 5000 is available with boring spindle diameter from 225 to 260 mm and power of 130 kW (S1).
Highlights
- Integral hydrostatic guideways with hydrostatic bearings for high speed traverse
- High spindle speeds (up to 1300 for 225 mm spindle diameter)
- Completely enclosed ram with hydrostatic guideways on 4 sides, giving mechanical and thermal symmetry
- No 3 automatic mechanic compensation system in-process: ram deflection - hedstock tilting - column tilting and deflection
- Automatic in-process compensation system of ram and spindle thermal extension based on direct measurement (Pama patented)
- Spindle bearings lubricated by air-oil system and thermostabilized by cooled oil circulation
- Cast iron structures for bed, saddle, column, headstock and ram
- Three ranges spindle drive gearbox for high spindle torque
Technical specification
| WORKING AREA | ||
|---|---|---|
| X Axis Column | mm | 6000 + n° x 1000 |
| Y-Axis Headstock | mm | 5000-8000 |
| Z-Axis Ram | mm | 1800 |
| W-Axis Spindle | mm | 1600 |
| Z + W Axes | mm | 3400 |
| SPINDLE HEADSTOCK | ||
| Boring Spindle Diameter | mm | 225-260 |
| Tool Taper | mm | ISO 60 |
| Ram Section | mm | 600 x 725 |
| Max. Rotation Speed | rpm | 1300-1200 |
| Spindle Gear Ranges | mm | 3 |
| Spindle Power (S1/S2) | kW | 130 / 162 |
| Spindle Torque (S1/S2) | Nm | 28600-40000 |
| MAX. AXIS FEED RATES | ||
| X-Y-Z-W Axes | mm/min | 10000 |